Altea 3CABLE STAND · 3 BARS
Coming soon
- For a stereo system with speaker and interconnect cables
- Stainless clamp on every bar
- Silver anodised; black anodised optional
Cable Stand · model Altea
Cables in the air. Connectors free of strain.
Let your cables float.
The Cable Stand Altea carries the interconnects between your components and your speaker cables, filters and absorbers included. The weight rests on the stand instead of pulling on binding posts and connectors. Each cable bar moves up or down by hand, no tools needed.
See models
Coming soon
Made in Altea · Spain · Europe
Cable Stand Altea 3 · dimensions in mm
1070total height
580 × 300footprint
3adjustable bars
Carry sound, not weight.
No pull on the terminal. No kink at the connector.
Good cables deserve good support.
Made for the cable, not the shelf.
A heavy cable weighs and pulls. If it hangs from the binding post or connector, the contact takes the strain. Altea picks the cable up at connection height and keeps it off the floor.
STRAIN RELIEF
The connector stays free
The cable rests on the stand just before it reaches the component. Binding posts, RCA and XLR no longer carry its weight.
TOOL-FREE
Height by hand
Each bar sits in the profile slot on a concealed inner bracket. Loosen the knurled screw, slide, tighten.
STAINLESS 30×20
Stainless steel clamp
A U-profile with two knurled nuts closes the clamp. Two memory foam strips adapt to the shape of each cable and hold every single one in place, whatever its diameter. Firm, with no pressure on a single point.
M8 FEET
Stable on any floor
A 300 mm deep base and two adjustable feet per column level it on wood, tile or carpet.
Two models, one system.
Same frame: 1070 mm tall with 500 mm of clear width. What changes is the number of cable bars. Both can be extended with additional bars.
Altea 4CABLE STAND · 4 BARS
Coming soon
- For bi-wiring, bi-amping or power cables
- Stainless clamp on every bar
- Silver anodised; black anodised optional
Additional barCABLE STAND ALTEA 3 AND 4
Coming soon
- Complete bar with clamp, memory foam strips and brackets
- Fits the existing columns
- Adjustable like the standard bars
We are preparing the launch. Prices and availability coming soon.
Specifications
All dimensions in millimetres. Anodised aluminium frame, stainless steel clamps.
| Total height | 1070 incl. feet |
|---|---|
| Column height | 986 |
| Outer width / clear width | 580 / 500 |
| Base depth | 300 |
| Profile | Anodised aluminium 40×40 |
| Cable bars | Altea 3: 3 · Altea 4: 4 · expandable |
| Height adjustment | Tool-free, knurled screw |
| Cable clamping | Stainless U-profile 30×20×2, knurled nuts M6, memory foam strips above and below |
| Levelling | 1 adjustable foot M8 Ø40 at each end of the base |
| Finish | Silver anodised; black anodised optional |
Arrives in modules. Assembled in minutes.
The Cable Stand ships disassembled in a compact box. The parts arrive pre-assembled in groups: just join the columns to their bases and set the bars at the height you need.
The hex key is included. Assembly instructions are in the box.
- Columns with base and feet2
- Complete cable bars3 / 4
- Stainless clamps with memory foam strips3 / 4
- Hex key6 mm
- Assembly instructions1