Cable Stand · model Altea
Cables in the air. Connectors free of strain.
Let your cables float.
The Cable Stand Altea, made of high-quality anodised aluminium and stainless steel, carries the interconnects between your components and your speaker cables, filters and absorbers included. The weight rests on the Cable Stand, leaving binding posts and connectors free of load. Each cable bar adjusts continuously in height and locks firmly in place.
Standard finish: high-quality black anodising. Silver anodising available on request.
Made in Altea · Spain · Europe
Illustrations are indicative: they do not show the product at 1:1 scale or in every detail.
Carry sound, not weight.
Height adjustable continuously, to the millimetre.
A good cable shouldn't have to carry its own weight.
Made for the cable, not the shelf.
A heavy cable weighs and pulls. If it hangs from the binding post or connector, the contact takes the strain. Altea picks the cable up at connection height and keeps it off the floor.
The connector stays free
The cable rests on a cable bar just before it reaches the component. Binding posts, RCA and XLR no longer carry its weight.
Adjustable height
Each cable bar sits in the column slot on a concealed inner bracket. Loosen the screw with a 4 mm hex key, slide the bar, tighten: it stays firmly in place.
Cable bar
A U-profile with two knurled nuts closes the clamp. Two memory foam strips adapt to the shape of each cable and hold every single one in place, whatever its diameter. Firm, with no pressure on a single point.
Stable on any floor
A 300 mm deep base and two adjustable feet per column level it on wood, tile or carpet.
Materials
Anodised aluminium
Sturdy, high-quality profiles. Anodising gives the surface lasting protection.
Stainless steel
Stainless steel clamps: strong, durable and corrosion-resistant.
Memory foam
High-quality memory foam: it adapts to every cable, holds it gently and protects its jacket.
Made to measure for your rack.
You choose the height of the Cable Stand Altea, from 50 to 125 cm, and the number of cable bars, from 2 to 5. The outer width of 600 mm and the clear width of 500 mm are the same on every version. Three example configurations:
Configurator
Enter your rack height and the number of levels: the configurator calculates your Cable Stand Altea to the centimetre.
Additional cable bars to expand at any time. We are preparing the launch. Prices and availability coming soon.
Specifications
All dimensions in millimetres. Anodised aluminium frame, stainless steel clamps.
| Total height | 500–1250 incl. feet, made to measure to the centimetre |
|---|---|
| Column height | 413–1163 |
| Outer width / clear width | 600 / 500 |
| Columns | Round anodised aluminium profile Ø 52 with one slot |
| Cable bars | Anodised aluminium profile 30×30 · 2 to 5 · expandable |
| Base | Rectangular anodised aluminium tube 60×40, 300 deep |
| Height adjustment | Continuous along the slot: M6 button-head screw (ISO 7380) from the inside, 4 mm hex key |
| Cable clamp | Stainless U-profile 30×20×2, 2 threaded rods M6 with knurled nuts, memory foam strips above and below with an air gap between them |
| Levelling | 1 adjustable foot M8 Ø40 with ball joint at each end of the base |
| Finish | High-quality black anodising, all parts in black; silver anodising on request |
Arrives in modules. Assembled in minutes.
The Cable Stand ships disassembled in a compact box. The parts arrive pre-assembled in groups: just join the columns to their bases and set the bars at the height you need.
Assembly instructions come in the box. All you need for assembly are 4 and 6 mm hex keys.
- Columns with base and feet2
- Complete cable bars2–5
- Stainless clamps with memory foam strips2–5
- Assembly instructions1